Products
Products
Compact machinery for workshops, small factories and site work — every model sized and priced for direct export.
Metalworking Machinery
Compact lathes, drilling and milling machines, bandsaws and shearing machines sized for workshops, garages and small production lines.
Bench Lathe CJM250
A compact 250 mm bench lathe for turning, facing and thread cutting. Single-phase 220 V — fits a garage or workshop without a three-phase supply.
View Details →Drilling & Milling Machine ZAY7020V
Drill and mill on one machine. 20 mm drilling capacity and 50 mm face milling, with a tilting head for angled work.
View Details →Metal Cutting Bandsaw G5012
Horizontal bandsaw with 180 mm cutting capacity and four blade speeds — clean, square cuts on bar, tube and profile.
View Details →Small Shearing Machine Q11-1x1300
Mechanical shearing machine for sheet up to 1 mm thick and 1300 mm wide — for HVAC, signage and light fabrication.
View Details →Remote Slope Mowers
Remote-controlled tracked mowers for slopes up to 45 degrees. The operator stays on flat, safe ground while the machine works where a riding mower cannot go.
QL500Y Remote Slope Mower - 500 mm Compact
Entry-level 9 hp remote slope mower. 140 kg, 500 mm deck, works on slopes to 45 degrees. The lightest machine in the range and the easiest to transport.
View Details →
QL600Y Remote Slope Mower - 500 mm Brushless
Same 500 mm deck as the QL500Y with a brushless control system and a longer body for better balance on side slopes. 163 kg.
View Details →
QL800 Remote Slope Mower - 800 mm
23 hp step up in the QL line. 800 mm deck, 255 kg, remote-only start, 4000 m2/h. For continuous work on highway embankments and dikes.
View Details →
HS500-24V Remote Slope Mower - 500 mm
9 hp with a longer 640 mm body for a lower centre of gravity. 500 mm deck, 150 kg, manual or remote start.
View Details →
HS800 Remote Slope Mower - 800 mm
The mid-range workhorse: 16 or 23 hp, 800 mm deck, 255 kg, 4000 m2/h, remote-only start. The most requested model for embankment and dike contracts.
View Details →
HS1000 Remote Slope Mower - 1000 mm
The widest deck in the range: 1000 mm, 23 hp, 300 kg. Covers the most ground per hour where access by larger equipment is impossible.
View Details →
HB800 Remote Slope Mower - 800 mm
800 mm deck in a shorter 1150 mm body, for tight embankment and ditch work where the longer HS800 is awkward to turn.
View Details →
LB500-24V Battery Slope Mower - 500 mm
Pure electric, 24V 40AH. 115 kg, 500 mm deck, no engine noise or exhaust. The choice for residential areas, night work and noise-restricted sites.
View Details →
LB600-24V Battery Slope Mower - 600 mm
Wider 600 mm deck and a 10-200 mm cutting height range on the same 24V 40AH electric platform. 3000 m2/h, 150 kg.
View Details →
LJ800 Remote Slope Mower - 800 mm Electric Start
Heavy-duty 15 hp platform with electric start and manual / electric / remote start modes. 340 kg, 800 mm deck, 20-150 mm cutting height.
View Details →
LJ1000 Remote Slope Mower - 1000 mm Electric Start
The largest machine in the catalogue: 1000 mm deck, 15 hp electric start, 370 kg. Built for long shifts on steep municipal and utility land.
View Details →Construction & Site Machinery
Small concrete mixers, plate compactors, rebar tools and vibrators for building, civil works and site preparation.
Small Concrete Mixer CM120
120 litre drum mixer with a 550 W motor — for concrete, mortar and render on small building projects.
View Details →Plate Compactor HZR-70
Petrol plate compactor with 10.5 kN centrifugal force — for compacting soil, gravel and paving sub-base.
View Details →Concrete Vibrator ZN-50
50 mm poker vibrator with 4 m hose — removes air pockets from poured concrete and prevents honeycombing.
View Details →Rebar Cutting Machine GQ40
Cuts reinforcing bar from 6 mm to 40 mm at 32 strokes per minute — for rebar fabrication on site.
View Details →Woodworking Machinery
Bandsaws, planers and edge banders for furniture workshops, joinery and carpentry businesses.
Woodworking Bandsaw MJ346
600 mm wheel bandsaw with 300 mm cutting height — resawing, curved work and veneer cutting for furniture shops.
View Details →Wood Planer MB503
300 mm surface planer with a 5000 rpm cutter head — squares and flattens timber before thicknessing.
View Details →Portable Edge Bander EB-100
Applies edge tape from 10 mm to 45 mm to board edges — for furniture assembly and shopfitting.
View Details →Packaging & Food Machinery
Sealing machines, vacuum packers and small filling machines for food processing and product packaging.
Continuous Band Sealer FR-900
Continuous band sealer for bags and pouches — sealing width 6 mm to 12 mm at up to 12 m per minute.
View Details →Vacuum Packer DZ-400
Chamber vacuum packer with a 400 mm sealing bar — extends shelf life and protects product in transit.
View Details →Liquid Filling Machine GZ-1000
Fills bottles and containers from 100 ml to 1000 ml with +/- 1 % accuracy — for liquids, oils and sauces.
View Details →Power & Cleaning Equipment
Air compressors, high-pressure washers and portable generators for workshops and on-site work.
Air Compressor 0.36/8
36 litre air compressor delivering 8 bar — for spray guns, impact tools, blow guns and workshop air.
View Details →High Pressure Washer HT-1800
180 bar high pressure washer with a 10 m hose — for vehicles, machinery, facades and workshop floors.
View Details →Petrol Generator EC2500
2.0 kW portable petrol generator — reliable 220 V power for site tools and emergency backup.
View Details →